{YTS} Troubleshooting Windows Installation From USB Drives – მეოთხე კედელი

Troubleshooting Windows installation from a USB drive can be a bit challenging, but here are some steps you can follow to help resolve the issue:

Step 1: Check for any errors or warnings

Restart your computer and immediately press F8 repeatedly until you see the Advanced Boot Options screen.

Select “Safe Mode” (Windows XP) or “Boot in Safe Mode” (Windows Vista, Windows 7, and later).

If you’re still seeing errors or warnings, try booting with a different USB drive.

Step 2: Check the USB drive

Insert your USB drive into another computer.

If it boots successfully from there, it’s likely not the issue.

Try using the same USB drive to install Windows again.

Step 3: Clean the USB drive

Use a can of compressed air or a small brush to clean out dust and debris from the USB drive.

Make sure the drive is free from any physical damage.

Step 4: Check for loose connections

Verify that all cables, including the SATA power cable, are securely connected to both the motherboard and the case.

If you’re using a laptop, ensure that the battery is not disconnected or dead.

Step 5: Try booting from another computer’s USB drive

Connect your Windows installation media (USB drive) to another computer.

If it boots successfully, this suggests that the issue is with the original drive.

Step 6: Check for BIOS settings

Enter your computer’s BIOS settings by pressing F2, F12, or Del while booting.

Look for the “Boot Order” or “USB Drive” settings to see if it’s set correctly.

Step 7: Update your USB drivers

Go to Device Manager (Windows) or System Information (Mac).

Right-click on the USB drive and select “Update Driver.”

Follow the prompts to update the drivers for the USB controller.

Step 8: Run a virus scan

Run a full system scan using an anti-virus software.

Check for any malware or viruses that may be causing the issue.

Step 9: Contact Microsoft support

Visit the Microsoft Support website and submit a request for assistance.

Provide your Windows installation media (USB drive) and any relevant error messages.

Follow their instructions to troubleshoot the issue.

If none of these steps resolve the issue, you may want to consider seeking further assistance from Microsoft’s technical support or visiting a local Microsoft store for expert help.

კომენტარის დატოვება

კომენტარის დასატოვებლად უნდა გაიაროთ ავტორიზაცია.

კომენტარის დატოვება კომენტარის გაუქმება

კომენტარის დატოვება